The following table provides technical specifications and performance indicators for the V8 camera. Superscripted numbers indicate additional information provided in the V8 specification table notes.
Maximum frame rate (fps) at full resolution
Maximum frame rate (fps) at partial scan
Frame rates (fps)
Sensor resolution (pixels)
3328 H x 2432 V
Number of pixels
4.5 microns x 4.5 microns
Physical sensor size (mm)
14.8 mm (H) x 10.9 mm (V), 18.38 mm (Diagonal)
On camera processing
256 shades and grayscale processing
Sub pixel resolution
851,968 x 620,544 (1/256 pixel resolution)
In-camera dynamic large blob eliminator
Threshold grid size (tiles)
208 x 152
Threshold grid tile dimensions (pixels)
16 x 16
Camera output modes
Full frame preview output
850 nm (Infrared (IR))
Number of LEDs
Cover type available
Secondary optics (standard factory fit)
Integrated, software reprogrammable and controlled
1,000 (software controlled)
View angle (Set by secondary optics)
Complex mold custom die-cast aluminum
Camera body dimensions
166.2 mm (H) x 125 mm (W) x 134.1 mm (D)
Weight (including strobe, excluding lens)
Number of mount points
Camera mount fixing bracket
Software and firmware upgradable
Through the Vicon application software. Firmware files can be placed on the Vicon Vantage host PC using any standard transmission method. The files are then uploaded from the Vicon Vantage host PC to the Vantage system hardware through the Reprogram Firmware option in the software.
A single RJ-45 connector to the PoE+ switch
Cat5e (Gigabit Ethernet with power and sync over Ethernet)
48V, 24 Watts max
Maximum number of cameras supported per PoE+ switch
Switch-dependent (see Understand when additional PoE+ switches are required)
Lens type supported
Ricoh Pentax 12.5 mm focal length
Plug and play compatibility
Mixed camera system compatibility
Interoperable with all Bonita Optical and Video and all MX T-Series cameras
System connectivity/ communication
Communication status indicators
Camera number indicator / information display
Camera status indicators
On camera and strobe unit and in software
Knock Detection indicator
Tap for Select notification
Advanced thermal design
V8 specification table notes
- Increased frame rates: Selecting a frame rate greater than full resolution automatically reduces image size by windowing. This keeps the pixel rate the same by transmitting a greater number of smaller images per second. You specify the capture frame rate of the Vantage cameras in the Vicon application software. Vantage cameras are capable of capturing up to a maximum of 2,000 fps, but the actual frame rate you can specify depends on the Vicon application software you are using. For details, see your Vicon software documentation. Above 120 fps the amount of light emitted per frame is linearly reduced. The light emitted per frame at 240 fps is half that output per frame at 120 fps. (The total strobed light output remains the same).
- Shuttering: The global shutter overcomes the negative effects of using rolling shutters for motion capture.
- Full marker grayscale: Marker centers are calculated based on every pixel of grayscale available for the marker, not just the detected marker edges. An on-camera circularity test ensures merged or partially occluded markers which need high-level processing are sent in full grayscale to the Vicon Vantage host PC.
- On-camera masking: This removes areas of the sensor where undesirable static light sources are recorded, for example strobes from other cameras.
- Blob elimination: Camera firmware automatically removes undesirable image data including both large blobs (e.g. sunlight reflections) and/or an unusually large number of blobs.
- Output modes: Automatic (centers for circular markers, grayscale for overlapping/partially occluded markers), Centers Only, Grayscale Only, Centers/Grayscale, and Preview (the entire sensor image).
- Preview mode: The full image is lightly filtered, decimated and transmitted to the Vantage host at 30 fps. This reduces the quantity of preview video data to a level that can be transmitted over Gigabit Ethernet to the Vicon Vantage host PC. Only one camera at a time is allowed to be sent in Preview mode as it requires most of the system bandwidth to transmit this one signal.