Expand all   Collapse all

Additional Nexus reference PDFs:

Nexus legacy documentation:

Versions Compared

Old Version 13

changes.mady.by.user Unknown User (groberts)

Saved on

compared with

New Version Current

changes.mady.by.user Unknown User (groberts)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Table of Content Zone
maxLevel4
minLevel4
locationtop
styledisc

For information on graphics cards, see Graphics processors for Nexus.

Operating systems for Nexus 2.10

Nexus 2.10 is supported under the following operating system:

  • Microsoft Windows 10, 64-bit (this is the Vicon-recommended OS): Compatible with and fully supported. Installation, software operation and required third-party drivers tested.

Although Nexus may install and function under other Microsoft Windows operating systems, Vicon does not support or recommend this.

Scroll Pagebreak

Basler video cameras and Nexus 2.10

If Basler digital cameras will be connected to Nexus 2.10, ensure you have updated to the Basler Pylon5 SDK and drivers (v5.0.0), which are available from the Vicon website.

If you are using an Intel i340, i350 or i210 network card, when you install the drivers, select the option for Filter drivers, not Performance drivers.

Note
Important
The Pylon5 driver supports : Basler GigE cameras under both Windows 10 and Windows 7.Basler FireWire cameras (A600 series) under Windows 7 only.

MATLAB and Nexus 2.10

If you are planning to use MATLAB with Nexus 2.10, ensure that, in addition to installing MATLAB, you install the .Net Framework version 4.5 or later.

ProCalc and Nexus 2.10

To run ProCalc with Vicon Nexus 2.10, you must install ProCalc 1.2.1 or later.

Vicon IMUs and Nexus 2.10

To update IMU firmware for Nexus 2.10, use Vicon Capture.U Desktop. For information, see the Vicon Capture.U User Guide.

...