Additional Nexus reference PDFs:

Nexus legacy documentation:

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  1. In the Subjects Resources tree, ensure that the subject you created earlier is the only subject selected.
  2. In the Properties section at the bottom of the pane, click the Add Parameter button.

  3. In the Add Subject Parameter dialog box, enter the following:
    • Name: Enter a name for the parameter. Do not use spaces. If you prefix the name with Right or Left (for example, LeftLegLength), it appears in the corresponding section (Left, Right, or if unspecified, General) in the Properties pane.
    • Required: If this parameter is required for the labeling skeleton, select the check box; if the measurement is optional, clear the check box.
    • Unit: Select the units of measurement (mm, deg, kg, etc.). If you are entering a parameter for which no suitable units are displayed (eg, Age), select None.
    • Value: Enter the parameter value that is initially displayed and can be edited after the subject has been measured. You can leave this field blank if preferred.
    • Default: Enter a measurement that can be selected if no other measurement is entered. You can leave this field blank if preferred.

  4. Click Add. The parameter is displayed under the General, Right, or Left sections, depending on the name you gave it. Required parameters are highlighted in pink until you supply a value for them; optional parameters (like HeadCirc in the following example), are not highlighted.

  5. Continue adding parameters until you have specified all the parameters needed for your template.