|Maximum frame rate (fps) at full resolution||260 1|
|Maximum frame rate (fps) at partial scan||2,000 1|
|Frame rates (fps)||30–2,000|
|Sensor resolution (pixels)||3328 H x 2432 V|
|Number of pixels||8,067093,072696|
|Pixel size||4.5 microns x 4.5 microns|
|Physical sensor size (mm)||14.8 mm (H) x 10.9 mm (V), 18.38 mm (Diagonal)|
|Shutter type||Global shutter 2|
|256 shades and grayscale processing||Yes 3|
|Sub pixel resolution||851,968 x 620,544 (1/256 pixel resolution)|
|On-board processors||3 processors|
|On-camera masking||Yes 4|
|In-camera dynamic large blob eliminator||Yes 5|
|Threshold grid size (tiles)||208 x 152|
|Threshold grid tile dimensions (pixels)||16 x 16|
|Camera output modes||5 6|
|Full frame preview output||Yes 7|
|Types available||850 nm (Infrared (IR))|
|Number of LEDs||22|
|Cover type available||Secondary optics (standard factory fit)|
|Strobe electronics||Integrated, software reprogrammable and controlled|
|Adjustable levels||1,000 (software controlled)|
|View angle (Set by secondary optics)||70°||Scroll Pagebreak|
|Camera housing||Complex mold custom die-cast aluminum|
|Camera body dimensions||166.2 mm (H) x 125 mm (W) x 134.1 mm (D)|
|Weight (including strobe, excluding lens)||1.6 kg|
|Number of mount points||2|
|Camera mount fixing bracket||Optional|
|Software and firmware upgradable||Yes|
|Upgrade methods||Through the Vicon application software. Firmware files can be placed on the Vicon Vantage host PC using any standard transmission method. The files are then uploaded from the Vicon Vantage host PC to the Vantage system hardware through the Reprogram Firmware option in the software.|
|Connector||A single RJ-45 connector to the PoE+ switch|
|Cabling||Cat5e (Gigabit Ethernet with power and sync over Ethernet)|
|Power supply||48V, 24 Watts max |
Conforms to IEEE 802.3at-2009 (25.5W) standard.
|Maximum number of cameras supported per PoE+ switch||Switch-dependent (see Understand when additional PoE+ switches are required)|
|Lens type supported||Ricoh Pentax 12.5 mm focal length|
|Plug and play compatibility||Yes|
|Mixed camera system compatibility||Interoperable with all Vero, Vue, Bonita Optical and Video and all MX T-Series cameras|
|System connectivity/ communication||Gigabit Ethernet|
|Communication status indicators||Yes|
|Camera number indicator / information display||Yes|
|Camera status indicators||On camera and strobe unit and in software|
|Knock Detection indicator||Yes|
|Tap for Select notification||Yes|
|Cooling||Advanced thermal design|
|Maximum temperature||35°C 8|
|Minimum temperature||-5°C 8|
Increased frame rates: Selecting a frame rate greater than full resolution automatically reduces image size by windowing. This keeps the pixel rate the same by transmitting a greater number of smaller images per second. You specify the capture frame rate of the Vantage cameras in the Vicon application software. Vantage cameras are capable of capturing up to a maximum of 2,000 fps, but the actual frame rate you can specify depends on the Vicon application software you are using. For details, see your Vicon software documentation. Above 120 fps the amount of light emitted per frame is linearly reduced. The light emitted per frame at 240 fps is half that output per frame at 120 fps. (The total strobed light output remains the same).
Anchor IncFrameRates IncFrameRates
With Vantage+ firmware, instead of (or in addition to) windowing, you can use high-speed mode, which uses subsampling to increase the frame rate without reducing the field of view, but with some reduction in resolution. For details, see High-speed mode and your Vicon software documentation.
Shuttering: The global shutter overcomes the negative effects of using rolling shutters for motion capture.
Anchor Shuttering Shuttering
Full marker grayscale: Marker centers are calculated based on every pixel of grayscale available for the marker, not just the detected marker edges. An on-camera circularity test ensures merged or partially occluded markers which need high-level processing are sent in full grayscale to the Vicon Vantage host PC.
Anchor FullMarkerGray FullMarkerGray
On-camera masking: This removes areas of the sensor where undesirable static light sources are recorded, for example strobes from other cameras.
Anchor OnCamMasking OnCamMasking
Blob elimination: Camera firmware automatically removes undesirable image data including both large blobs (e.g. sunlight reflections) and/or an unusually large number of blobs.
Anchor BlobElim BlobElim
Output modes: Automatic (centers for circular markers, grayscale for overlapping/partially occluded markers), Centers Only, Grayscale Only, Centers/Grayscale, and Preview (the entire sensor image).
Anchor OutputModes OutputModes
Preview mode: The full image is lightly filtered, decimated and transmitted to the Vantage host at 30 fps. This reduces the quantity of preview video data to a level that can be transmitted over Gigabit Ethernet to the Vicon Vantage host PC. Only one camera at a time is allowed to be sent in Preview mode as it requires most of the system bandwidth to transmit this one signal.
Anchor PreviewMode PreviewMode
Operating temperature: While Vicon cameras may operate outside the given limits, these are the temperatures to which Vicon has tested the cameras. If the cameras are operated outside of these limits, image quality may be degraded, the external surface temperatures may exceed the relevant safety limits, and any failures are not covered under warranty.
Anchor OperatingTemp OperatingTemp