Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The capture frame rate for each Vicon Vantage camera can be configured in the Vicon application software. The configured frame rate will also affect the field of view. Higher camera frame rates may make windowing of the sensor necessary, such that the sensor area used for capture is reduced in comparison to lower camera frame rates. For full details, see Vicon Vantage camera technical specifications. If you are using Vantage+ firmware or later, you can also select High Speed mode in your Vicon application software to increase the camera frame rate with little or no reduction in the field of view.

Image circle

Another characteristic of the camera sensor is the image circle. This is the sharp circular image that the camera lens casts onto the sensor, as shown in the following image.

...

The aperture and magnification affect the depth of field, that is, the portion of the image that has sharp focus. Immediately surrounding this area, there is a region in which the image remains in focus. Outside of this area, moving towards or away from the lens, the focus becomes progressively less sharp and the image appears out of focus. Thus, as the aperture and focal length decrease, the depth of field increases. Conversely, as the aperture and focal length increase, the depth of field decreases.

Scroll Pagebreak

Camera lens filters

To optimize the performance of the Vantage cameras, each lens is fitted with an optical filter that attenuates wavelengths of light other than the narrow passband required to pass the light emitted by the light-emitting diodes (LEDs) from the Vantage strobe unit and reflected back from the markers to the camera.

...