Page History

Animated retargeting

To key constraint weights over time:

1. In the Subject Setup panel, click the Regargeting tab.
2. To enable you to immediately see the changes you're making, in the toolbar at the top, ensure the Enable interactive retargeting button  is selected (green).
3. If you want to automatically copy your changes to weights from one side of the skeleton to the other, ensure the Mirror Weight Changes option is also selected.
4. In the Constraints section, edit the weights as required.
5. To add keys, select the relevant line(s), right-click and select Set Key.

To fine-tune keyframes, you can use the controls in the Graph view. For example, you can now use the right-click (context) menu in the Graph view to to cut or insert sparse keys. You can also change the time of a key by clicking and dragging on the Graph view.

Interactive solving and retargeting

You can now see changes that you make to the solver in real time.

To use the new interactive solving feature:

1. Load a scene with a solved character in it.
2. Make sure interactive solving is turned on. To do this:
   • In the Subject Setup panel, click the Solving tab and on the toolbar at the top, ensure the Enable interactive solving button is selected (green).
3. Adjust the solve, for example by rotating a joint.
4. Notice that when you release the rotation widget, the solve updates and the rest of the limb updates.

Note that you can use interactive solving for both solving and retargeting skeletons. To use interactive solving for a retargeting skeleton, use the same procedure as above, but click the Retargeting tab and on the toolbar at the top, ensure the Enable interactive retargeting button  is selected (green).

For information on the relevant HSL commands, see New HSL scripting commands.

Anchor
MirrorWeights MirrorWeights

Mirror weights

You can now use a new mirroring option, Mirror Weight Changes, when you're adding or editing weights.

To mirror weight constraints:

1. In the Subject Setup panel, click the Regargeting tab.
2. At the top of the Constraints section, ensure the Mirror Weight Changes check box is selected (the default setting).
   When you adjust the weight values  between the source and target skeletons on one side, they are automatically mirrored on the opposite side, so that weight values adjusted between, for example, the left lower arm on the source and target skeletons, are mirrored on the right lower arm of the source and target skeletons.

   Scroll Pagebreak

Mirror constraints

To make the creation of retargeting constraints faster and less error prone, you can now choose to mirror the changes you make to one side of the source and target skeletons onto the other side.

The same option enables you to mirror edits to retargeting constraints.

To mirror retargeting constraints:

1. In the Subject Setup panel, click the Regargeting tab.
2. When you create or edit retargeting constraints, at the top of the Constraints section, ensure the Mirror Creation check box is selected (the default setting).
   The constraints created between the source and target skeletons on one side are automatically mirrored on the opposite side.

   Scroll Pagebreak

Mirror joint manipulation

When posing a target or source skeleton during retarget setup, you often need to make the same adjustment to each side. To speed up pose adjustments, you can now automatically mirror the change you've made to one side to the other side. You can use the same mirroring option when setting up a solve to mirror changes to the pose or bone length. A new button in the manipulator toolbar enables you to do this.

To mirror changes to the pose or bone length of a skeleton:

• In the Manipulator toolbar on the left of the view pane, ensure the Mirror manipulation button  is selected (green).
  When you create make changes to one side of the subject, they are automatically copied to the other side.

MOV to MOV batch-processing

You can now batch-process auto compressed MOVs in Post to un-distort the video and add the timecode as an overlay.

For information on batch-processing video files, see Transcode video files in Getting started with Vicon Shogun.

Maya video workflow improvements

Shogun 1.5 introduces several improvements to the workflow for exporting an FBX file for use in Maya^® software.

If a timecode is used in Post, the FBX export now writes out a JSON file to the same location as the exported FBX file.

In the Preferences dialog box, the Export data starting at timecode offset frame option for FBX export also enables you to choose whether the exported data starts at the timecode start or from frame 1.

When the option is selected, the exported data starts at the timecode start.
When the option is cleared (the default), the exported data starts at frame 1. By running a supplied Python script, you can then use the exported JSON file to set the timecode in Maya, provided a timecode was used in Post.

To use the FBX in Maya:

1. In Maya, open (don't import) the FBX file.

2. With the file open, run the CleanupFBXImport.py script, by default found in:
   C:\Program Files\Vicon\ShogunPost1.5\Scripts\Maya\
   The script sets the scene in a number of ways (see the following list) including setting the correct timecode and linking the MOV file to the correct camera.
   
   

   Tip
   Tip To get Maya to show the video as time changes, you may need to click in Overlay view or show the texture select the camera in the Outliner and in the Attributes panel, select the texture tab (see following image).

3. Set the playback speed to the same speed as the video capture rate (eg, 30 fps, as shown in the following image).
   
   Image Added

In total, the script does the following:

• Sets the timecode start in Maya using the JSON file that is saved with the FBX if timecode was present in Post.
  This allows the animation and video overlay to start at frame 1, yet maintains the timecode.
• Switches image planes to movie mode.
• Switches image planes to point to MOV files instead of image sequences.
• Switches image planes to only show when looking through the camera.
• Locks the transforms of image plane cameras.
• Sets the Frame Offset attribute on video texture to account for video starting at frame 0 and the start offset from the JSON file.

Scrub timeline with middle mouse button

In the Cameras view, you can now scrub the timeline by holding down the middle mouse button.

Anchor
NewHSLCommands NewHSLCommands

New HSL scripting commands

• getInteractiveRetargetCmd
• getInteractiveSolveLabeling
• getInteractiveSolveSolving
• setInteractiveRetargeting
• setInteractiveSolveLabeling
• setInteractiveSolveSolving