Vicon Vantage banner

Important
The following information applies to Vicon Lock Studio only.

Connect the output VESA Stereo signal from the VESA Stereo Out connector to the device requiring synchronization.

The VESA Out signal is only provided if the system frame rate is set to a compatible multiple of a VESA signal. The following table gives example frame rates:

System frame rateVESA Out signal
50 fpsNo signal provided
100 fpsVESA 100 Hz signal (50 Hz square wave, 50% duty cycle)
120 fpsVESA 120 Hz signal (60 Hz square wave, 50% duty cycle)
200 fpsVESA 100 Hz signal, etc.
Note
The VESA Out signal is independent of the VESA In signal. Therefore, if you are synchronizing to an external VESA stereo input source, you can still use the VESA Out. VESA stereo input is not required for VESA Out to work.